In summer, many household products need careful maintenance, otherwise it is easy to produce adverse changes in wet summer and affect the service life. The same is true of aluminum alloy doors and windows at home, which need good maintenance. I will provides 7 tips to help you maintain aluminum alloy doors and windows in summer.
1. When using aluminum alloy doors and windows, the action should be light, and the push and pull should be natural; If you find it difficult, don't pull or push hard, but eliminate the fault first. Ash accumulation and deformation are the main reasons for the difficulty of pulling aluminum alloy doors and windows. Keep the door frame clean, especially the push-pull groove. The dust accumulated in the groove and the door sealing top can be sucked with a vacuum cleaner.
2. When cleaning aluminum alloy doors and windows, people shall not step on the aluminum frame or pull the frame as support.
3. Aluminum alloy doors and windows can be dipped with soft cloth with clean water or neutral detergent. Do not use ordinary soap and washing powder, and do not use strong acid-base cleaners such as decontamination powder and toilet detergent.
4. After rainy days, wipe the wet glass and door and window frames in time, and pay special attention to wiping the accumulated water in the chute. If the chute is used for a long time and the friction force increases, you can add a little engine oil or apply a layer of wax oil.
5. The connecting parts of aluminum alloy frame shall be checked frequently, the bolts shall be tightened in time, and the damaged parts shall be replaced. The vulnerable parts of aluminum alloy doors and windows such as positioning shaft pin, wind support and ground spring shall be inspected frequently, and lubricating oil shall be added regularly to keep them clean and flexible.
6. Sealing wool and glass adhesive seal are the key structures to ensure the sealing and thermal insulation of doors and windows. If they fall off, they shall be repaired and replaced in time.
7. Frequently check the junction of aluminum alloy frame and wall. If it is loose over time, it is very easy to deform the whole frame, so that the doors and windows cannot be closed and sealed. Therefore, the screws at the connection shall be tightened immediately. If the screw footing is loose, it shall be sealed with epoxy strong glue and a small amount of cement.
Kdsbuilding is a comprehensive door company integrating the development, production and sales of aluminum alloy decorative doors. The products in charge include, aluminum alloy doors, sliding doors, hanging doors, folding doors, flat doors, lattice doors, wardrobe doors, etc. the whole process adopts European manufacturing technology. The product quality and various technical properties have reached the national standards from the incoming of raw materials, processing, production, assembly and commissioning.